Paessler SNMP Tester Version 2 descriptions With Paessler SNMP Tester you can run simple SNMP requests against a device in your network. During the test each single step of the SNMP request is logged into a logfile for analysis. The idea of this free program is to debug SNMP requests down to the protocol level in order to find communication and/or data problems in SNMP monitoring configurations. Just follow these simple instructions: 1} Download Paessler SNMP Tester & run the snmptest. exe file. 2} Enter the IP address of your device & select the SNMP port & the SNMP community string. 3} Select a request type: MIB2 Interface: Reads the traffic counter of a port according to the MIB2 OID Custom OID: Enter a custom OID value to access any OID value on the device Device Uptime: Reads the standard system uptime value from the device 4} It may be necessary to select a specific local IP for the SNMP request 5} Click on "Run Test" to start the testing process. 6} During the test you will find detailed information in the logfile window.